Nonreciprocal devices in integrated optics

This article reviews the solutions that have been studied for the implementation of nonreciprocal devices in integrated optics. These components, either isolators or circulators, use the nonreciprocal interaction between light and a magnetic medium. The only two isolators that have been experimented on to date are described in detail with their advantages and drawbacks, and some solutions are proposed to overcome the difficulties encountered.     

Acid-induced conformational alteration of cis-preferential aromatic amides bearing N-methyl-N-(2-pyridyl) moiety

A series of cis-preferential aromatic N-methyl amides was designed and synthesized, and acid-induced conformational alteration of these compounds was investigated by means of NMR measurements in solution and X-ray crystal structure analysis. Compounds with a terminal N-methyl-N-(2-pyridyl) amide unit showed acid-induced conformational change from cis to trans, while those with a terminal N-methyl-2-pyridinecarboxamide unit showed a change of the carbonyl orientation from anti to syn with retention of cis conformation.     

流动控制沉积法制备PMMA叠层光子晶体薄膜及其光学性能研究

采用流动控制沉积法, 通过调控泵速和聚甲基丙烯酸甲酯(PMMA)胶体微球溶液的浓度, 制备出微球排列高度有序且薄膜紧密附着于基底的高质量光子晶体薄膜. 获得了制备高质量PMMA光子晶体薄膜的组装条件范围, 发现在该条件范围内, 当泵速或胶体微球溶液浓度一定时, PMMA光子晶体薄膜的厚度随胶体微球溶液浓度的增加或泵速的降低而增加. 研究了组装条件对PMMA光子晶体薄膜光学性能的影响, 发现光子禁带位置随光子晶体薄膜厚度增加或减少而红移或蓝移. 在此基础上, 控制组装条件得到了不同尺寸微球堆叠而成的叠层光子晶体薄膜, 并研究了其光学性能的变化规律. 结果显示, 叠层光子晶体薄膜的光子禁带峰为各层叠层光子晶体禁带峰的简单叠加, 且峰强度受光入射角方向影响.     

基于微流控技术的蛋白质结晶及其筛选方法的研究进展简

微流控技术以其高通量、低消耗和集成化等优点成为蛋白质结晶微型化研究的重要手段. 本文综述了基于微流控技术的蛋白质结晶技术和方法,主要包括微泵微阀、液滴(Droplet)、滑动芯片(SlipChip)以及液滴实验室(DropLab)等技术. 此外,还针对当前膜蛋白在结构生物学研究中的重要地位,综述了应用于膜蛋白结晶的微流控技术的研究进展.     

Incorporating high-pressure electroosmotic pump and a nano-flow gradient generator into a miniaturized liquid chromatographic system for peptide analysis

We integrate a high-pressure electroosmotic pump (EOP), a nanoflow gradient generator, and a capillary column into a miniaturized liquid chromatographic system that can be directly coupled with a mass spectrometer for proteomic analysis. We have recently developed a low-cost high-pressure EOP capable of generating pressure of tens of thousands psi, ideal for uses in miniaturized HPLC. The pump worked smoothly when it was used for isocratic elutions. When it was used for gradient elutions, generating reproducible gradient profiles was challenging; because the pump rate fluctuated when the pump was used to pump high-content organic solvents. This presents an issue for separating proteins/peptides since high-content organic solvents are often utilized. In this work, we solve this problem by incorporating our high-pressure EOP with a nano-flow gradient generator so that the EOP needs only to pump an aqueous solution. With this combination, we develop a capillary-based nano-HPLC system capable of performing nano-flow gradient elution; the pump rate is stable, and the gradient profiles are reproducible and can be conveniently tuned. To demonstrate its utility, we couple it with either a UV absorbance detector or a mass spectrometer for peptide separations.     

基于光滑粒子流体动力学的滑油泵数值仿真

基于光滑粒子流体动力学方法,构建齿轮泵壳体及内部流体的粒子模型,对内啮合齿轮泵在不同工况下的流量特性进行数值模拟。首先设置了均匀分布的油泵出入口压强,计算得到的流量结果与试验结果吻合,且在中低转速下流量与转速呈线性关系;针对高转速下油泵流量降低的问题,通过适当减小周期模型内部的流体粒子数反映流量降低,获得了与试验值相吻合的连续转速流量的模拟结果;针对影响齿轮泵性能的间隙和空化现象,结合模型特点给出了相应的近似处理方法。通过以上研究,将SPH方法成功地应用于滑油泵问题的分析计算。     

钕玻璃的热致断裂及泵浦极限

以激光介质的第一主应力为评判标准,依据Griffith微裂纹理论作为断裂临界应力,基于已报道的断裂实验数据和3维、瞬态的有限元计算,建立了预测一定泵浦参数下钕玻璃断裂可能性的Weibull统计模型,同时分析了影响介质泵浦极限的其它因素。结果表明:材料的抛光工艺决定了介质的断裂应力;对于短脉冲大能量方式工作的钕玻璃介质,基于美国2 0世纪9 0年代的抛光水平,1 Hz以下低重频时应优先考虑18 kW.cm-2的泵浦饱和极限,10 Hz以上高重频时应优先考虑介质的断裂极限。     

风速对空气源热泵翅片管换热器结霜特性影响

针对风速对空气源热泵翅片管室外换热器结霜特性的影响进行了实验研究.实验结果表明,结霜量随风速的增加不是成线形增长,在风速为1.3m/s时结霜量最小.霜层厚度随着风速的增加反而减小,而翅片管换热器的最大换热量随着风速的增加而增加.     

Different defect morphologies in polyethylene crystal induced by surface physicochemical properties

The physicochemical properties of surfaces have a great effect on the micro-morphologies of the crystal structures which are in contact with them.Understanding the interaction mechanism between the internal driving forces of the crystal and external inducing forces of the surfaces is the prerequisite of controlling and obtaining the desirable morphologies.In this work,the dynamic density functional theory was applied to construct the free energy functional expression of polyethylene(PE) lattice,and the micro-dynamic evolution processes of PE lattice morphology near the surfaces with different properties were observed to reveal the interaction mechanism at atomic scale.The results showed that the physical and chemical properties of the external surfaces synergistically affect the morphologies in both the defect shapes and the distribution of the defect regions.In the absence of the contact surfaces,driven by the oriented interactions among different CH2 groups,PE lattices gradually grow and form a defect-free structure.Conversely,the presence of contact surfaces leads to lattice defects in the interfacial regions,and PE lattice shows different self-healing abilities around different surfaces.     

Simultaneous enantioselective determination of omeprazole,rabeprazole, lansoprazole,and pantoprazole enantiomers in human plasma by chiral liquid chromatography–tandem mass spectrometry

Proton pump inhibitors, including omeprazole, rabeprazole, lansoprazole, and pantoprazole, achieved simultaneous enantioselective determination in the human plasma by chiral liquid chromatography–tandem mass spectrometry. The four corresponding stable isotope‐labeled proton pump inhibitors were adopted as the internal standards. Each enantiomer and the internal standards were extracted with acetonitrile containing 0.1% ammonia, then separated with a Chiralpak IC column (5 µm, 4.6 mm × 150 mm) within 10 min. The mobile phase was composed of acetonitrile–ammonium acetate (10 mM) containing 0.2% acetic acid (50:50, v/v). To quantify all enantiomers, an API 4000 tandem mass spectrometer was used, and multiple reaction monitoring transitions were performed on m/z 360.1→242.1, 384.1→200.1, 370.1→252.1, and 346.1→198.1, respectively. No significant matrix effect was observed for all analytes. The calibration curve for all enantiomers were linear from 1.25 to 2500 ng/mL. The precisions for intra‐ and inter‐run were < 14.2%, and the accuracy fell in the interval of –5.3 to 8.1%. Stability of samples was confirmed under the storage and processing conditions. The developed method was also suitable for separation and determination of ilaprazole enantiomers. The validated method combining the equilibrium dialysis method was applied to the protein binding ratio studies of four pairs proton pump inhibitor enantiomers in human plasma.